Specifications

SmartSwitch ATM Switch Reference Manual 2-331
SwitchTrafficCongestion
SwitchTrafficCongestion
Use SwitchTrafficCongestion to manage global switch traffic congestion thresholds on the switch.
Operators
modify, show
Parameters
Parameter Description Value/Field Size Default
[LowEPDWatermark Threshold (in cells) used by the switch
to trigger low EPD (early packet
discard), EFCI, and backward RM
(resource management) cell marking.
0-16383 or 0-32767,
depending on memory
size.
[HighEPDWatermark] Threshold (in cells) the switch uses to
trigger high EPD.
0-16383 or 0-32767,
depending on memory
size.
[CLP1_DiscardWatermark] Threshold the switch uses to discard
cells when the memory buffer is full.
0-16383 or 0-32767,
depending on memory
size.
[RMCellMarkingEnable] Indicates whether RM cell marking is
enabled on the switch.
Disable, Enable Disable
[ExplicitRateMarkingEnable] Indicates whether explicit rate
marking is enabled on the switch.
Disable, Enable Disable
[EFCIMarkingEnable] Indicates whether the EFCI cell is
enabled on the switch.
Disable, Enable Disable