Specifications

SmartSwitch ATM Switch Reference Manual 2-327

SwitchConfig

Use SwitchConfig to manage switch-related parameters, such as switchname and IP address.

Operators

modify, show

Parameters

Input Parameter Description Value/Field Size Default

[SwitchName] Name of the switch. 1-19 characters switch_1

[IPAddress] IP address of Ethernet port on the switch. Dot decimal/

7-15 characters

10.0.0.1

[IPNetMask] IP netmask of Ethernet port. Defaults to

the appropriate netmask, based on IP

address class. Calculated from the first

two high bits of the IP address. Must be

specified only if IP subnets are being

used.

Dot decimal/

7-15 characters

255.0.0.0,

255.255.0.0 or

255.255.255.0

Output Parameter Description

[Switch Name] Name of the switch. (Same as the [SwitchName] input parameter.

[IP Address] IP address of the Ethernet port on the switch. (Same as the [IPAddress] input

parameter.)

[IP Netmask] IP netmask of the Ethernet port. (Same as the [IPNetMask] input parameter.)

[CPU MAC Address (Base)] Base MAC (media access control) address for the TSM/CPU module. There are

128 addresses, starting at this base address. The first is used for the Ethernet port

associated with the TSM/CPU.

[Chassis MAC Address (Base)] Base MAC address for the SmartSwitch 6500 chassis.

[Power Mode] Whether or not the switch is configured for a redundant power supply.

[Supply Installed] Which power supply is installed.

[Supply ON] Which power supply is ON.