Specifications

2-322 SmartSwitch ATM Switch Reference Manual
SVCById
SVCById
Use SVCById to display a single or all SVCs in normal or detail mode.
Operator
show
Parameters
In the Output Parameter table below, (
</d>
) indicates parameters that are available only through the show svdbyid
/d
(detailed) command
Input Parameter Description Value/Field Size Default
[CrossConn] Identifier unique for each connection.The
identifier is displayed by the
show SVC
command.
No default
Output Parameter Description
[Conn Id] and [Cross Connect Id] Identifier for each unique connection. (Same as the [CrossConn]
input parameter.)
[Low Port] Port receiving the backward flow of the high/low pair.
[Low VPI] Low VPI (virtual path identifier) number.
[Low VCI] Low VCI (virtual circuit identifier) number.
[Low Cast Type] Low port connection type (PMP or PTP).
[High Port] Port sending the forward flow of the high/low pair.
[High VPI] High VPI (virtual path identifier) number.
[High VCI] High VCI (virtual circuit identifier) number.
[High Cast Type] High port connection type (PMP or PTP).
[Creation Time] Time when the SVC was established (with respect to boot time of
the switch). Displayed in Hour:Minute:Seconds format.
[Admin Status]
</d>
Administrative status (UP or DOWN).