Specifications

2-314 SmartSwitch ATM Switch Reference Manual
SSCOPConfig
[KeepAliveTime] Rate of PollStat exchange
(in milliseconds) in the
absence of SD PDU
traffic.
1000-2000 2000
[NoResponseTime] Maximum time (in
milliseconds) within which
a Poll must be
acknowledged by a Stat
PDU.
10000-15000 7000
[CCTime] Rate at which BEGIN and
END PDUs are generated
during link establishment
of release.
1000-2000 1000
[RxWindowSz] Receive window size
when SSCOP stack is
initialized.
32-256 64
Output Parameter Description
[Port#] Port number on the switch.
[MaxPD] Number of SD PDUs after which a Poll PDU is generated.
[MaxCC] Number of BEGIN PDUs sent during line establishment.
[PollTm] Time (in milliseconds) between generation of Poll PDUs. (Same as the [PollTime]
input parameter.)
[KpAliveTm] Rate of PollStat exchange (in milliseconds) in the absence of SD PDU traffic. (Same as
the [KeepAliveTime] input parameter.)
[NoRespTm] Maximum time (in milliseconds) within which a Poll must be acknowledged by a Stat
PDU. (Same as the [NoResponseTime] input parameter.)
[CCTm] Rate at which BEGIN and END PDUs are generated during link establishment of
release. (Same as the [CCTime] input parameter.)
[RxWindowSz] Receive window size when SSCOP stack is initialized.
Input Parameter Description Value/Field Size Default