Specifications

SmartSwitch ATM Switch Reference Manual 2-311

SpvpTarget

(SmartSwitch 6500 Only)

Use SpvpTarget to display SPVP target information on the switch. Information is displayed only if the switch is the

destination (target) of an SPVP. The SPVP is established (added) at a source switch across the ATM network.

Operators

show

Parameters

Descriptions

Input Parameter Description Value/Field Size Default

[PortNumber] Port number on the switch (number of the

SPVP target port).

A1 to B4 (2500 family),

1A1 to 8B4 (6500),

or Al

All

Output Parameter Description

[Port] Port number on the switch. (Same as the [PortNumber] input parameter.)

[TargetAddress] Destination address to which the SPVP connects.

[Vpci] VPI allocated to the target port.

[OperStatus] Operational status of the SPVP. Possible values are: Connected,

Establishment in Progress, Retries Exhausted, and Other.

[Source NetPrefix] ATM address prefix at the source port (at the switch that initiated the

SPVP).

Operator Parameters/Permissions Description

show spvptarget [PortNumber] <portnumber>

Administrator

Displays SPVP target information on the

switch.