Specifications

SmartSwitch ATM Switch Reference Manual 2-309

SpvpRestart

(SmartSwitch 6500 Only)

Use SpvpRestart to restart a failed SPVP on the switch. An SPVP fails when its call setup request is rejected by the

target switch. The SPVP call request is sent from this switch (the source switch) to the target switch. SpvpRestart uses

SPVP target information provided by the last attempt to establish the SPVP (information provided as input parameters

by the Spvp attribute). If the target information was incorrect, restart the SPVP using the Spvp attribute and correct

parameter values.

Operators

modify

Parameters

This attribute has no output parameters.

Descriptions

Input Parameter Description Value/Field Size Default

[PortNumber] Port number on the switch. A1 to B4 (2500 family),

1A1 to 8B4 (6500),

or Al

All

[SourceVpi] VPI allocated to the originating port.

Operator Parameters/Permissions Description

modify spvprestart [PortNumber] <portnumber>

[SourceVpi] <sourcevpi>

Administrator

Restarts an SPVP.