Specifications

SmartSwitch ATM Switch Reference Manual 2-307
SpvpFailed
SpvpFailed
(SmartSwitch 6500 Only)
Use SpvpFailed to display failed SPVPs on the switch. An SPVP fails when its call setup request is rejected by the
target switch. The SPVP call request is sent from this switch (the source switch) to the target switch.
Note Use the show spvp /d command to determine the specific cause of SPVP failure
(indicated by the Last Release Cause code).
Operators
show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[PortNumber] Physical port number on the switch. A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or Al
All
[SourceVpi] VPI allocated to the SPVP source port.
Output Parameter Description
[PortNumber] Physical port number on the switch.
[SourceVpi] VPI allocated to the SPVP originating port.
[CurrentFailingTimeStamp] Time stamp indicating when the SPVP started failing.
Operator Parameters/Permissions Description
show spvpfailed [PortNumber] <portnumber>
[SourceVpi] <sourcevpi>
Administrator
Displays information on failed SPVPs.