Specifications

2-302 SmartSwitch ATM Switch Reference Manual
Spvp
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the show spvp
/d
(detailed) command
[RetryLimit] Maximum number of SPVP retries. 0-65535
[RetryThreshold] Number of consecutive failed setup attempts for
a particular SPVP before the SPVPCallFailures
object is incremented.
0-65525
Output Parameter Description
[Port] Physical port number on the switch. (Same as the [PortNumber] input
parameter.)
[Src VPI] VPI allocated to the SPVP source port. (Same as the [SourceVpi] input
parameter.)
[Operation Status] Indicates operational status of the SPVP. Possible values are: Connected,
Establishment in Progress, Retries Exhausted, and Other.
[Total Number of SPVPs] Indicates the total number of SPVPs on the switch.
[Target Address] Destination (target) address to which the SPVP attempts to connect.
[Target VPI] VPI allocated to the target port. (Same as the [DestinationVpi] input
parameter.)
[Last Release Cause] Code that describes cause of SPVP failure (why SPVP has failed to
connect) (see Table 2-11).
[Operation Status] Operational status of the SPVP.
[Retry Interval] Time interval between SPVP retries.
[Retry Timer] Value of the retry timer.
[Retry Threshold] Number of consecutive failed setup attempts for a particular SPVP before
the SPVPCallFailures object is incremented.
[Retry Failures] Number of failed retry attempts.
[Retry Limit] Maximum number of SPVP retries.
[Traffic Type (Forward)] Type of traffic in the forward (source to target) direction.
Input Parameter Description Value/Field Size Default