Specifications

SmartSwitch ATM Switch Reference Manual 2-299
SpvcTarget
SpvcTarget
Use SpvcTarget to display SPVC target information on the switch. Information is displayed only if the switch is the
destination (target) of an SPVC. The SPVC is established (added) at a source switch across the ATM network.
Operators
show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch (number of the
SPVC target port).
A1 to B4 (2500 family),
1A1 to 8B4 (6500),
or Al
All
Output Parameter Description
[Port] Port number on the switch. (Same as the [PortNumber] input parameter.)
[TargetAddress] Destination address to which the SPVC connects.
[Vpci] VPI allocated to the target port.
[Vci] VCI allocated to the target port.
[OperStatus] Operational status of the SPVC. Possible values are: Connected,
Establishment in Progress, Retries Exhausted, and Other.
[Source NetPrefix] ATM address prefix at the source port (at the switch that initiated the
SPVC).
Operator Parameters/Permissions Description
show spvctarget [PortNumber] <portnumber>
Administrator
Displays SPVC target information on the
switch.