Specifications

2-286 SmartSwitch ATM Switch Reference Manual
Spvc
Table 2-10 SPVC Failure Cause Codes
Code Description
1 Unallocated (unassigned) number.
2 No route to specified transit network.
3 No route to destination.
16 Normal call clearing.
17 User busy.
18 No user responding.
21 Call rejected.
22 Number changed.
23 User rejects all calls with calling line identification (CLID) restriction.
27 Destination out-of-order.
28 Invalid number format (address incomplete).
30 Response to STATUS ENQUIRY.
31 Normal, unspecified.
34 Requested called party soft PVCC not available.
35 Requested VPI/VCI not available.
36 VPCI/VCI assignment failure.
37 User cell rate not available.
38 Network out of order.
41 Temporary failure.
43 Access information discarded.
45 No VPCI/VCI available.
47 Resource unavailable, unspecified.
49 Quality of Service unavailable.
53 Call cleared due to change in PGL
57 Bearer capability not authorized.
58 Bearer capability not presently available.
63 Service or option not available, unspecified.
65 Bearer capability not implemented.
73 Unsupported combination of traffic parameters.
78 AAL parameters cannot be supported.