Specifications

2-284 SmartSwitch ATM Switch Reference Manual
Spvc
In the Output Parameter table below,
(
</d>
)
appears next to parameters that are available only through the show spvc
/d
(detailed) command
[BackwardTrafficDescriptor
Index]
Index of the backward (target to source) traffic
descriptor.
[RetryInterval] Time interval between SPVC retries. 0-3600000 milliseconds
[RetryLimit] Maximum number of SPVC retries. 0-65535
[RetryThreshold] Number of consecutive failed setup attempts for
a particular SPVC before the
SPVCCCallFailures object is incremented.
0-65525
Output Parameter Description
[Port] Physical port number on the switch. (Same as the [PortNumber] input
parameter.)
[Src VPI] VPI allocated to the SPVC source port. (Same as the [SourceVpi] input
parameter.)
[Src VCI] VCI allocated to the SPVC source port. (Same as the [SourceVci] input
parameter.)
[Operation Status] Indicates operational status of the SPVC. Possible values are: Connected,
Establishment in Progress, Retries Exhausted, and Other.
[Total Number of SPVCs] Indicates the total number of SPVCs on the switch.
[Target Address] Destination (target) address to which the SPVC attempts to connect.
[Target VPI] VPI allocated to the target port. (Same as the [DestinationVpi] input
parameter.)
[Target VCI] VCI allocated to the target port. (Same as the [DestinatiionVci] input
parameter.)
[Last Release Cause] Code that describes cause of SPVC failure (why SPVC has failed to
connect) (see Table 2-10).
[Retry Interval] Time interval between SPVC retries.
[Retry Timer] Value of the retry timer.
Input Parameter Description Value/Field Size Default