Specifications

SmartSwitch ATM Switch Reference Manual 2-279

SigTimer

Use SigTimer to set or display signaling timer values for a port

Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.

Hot-swapping is replacing a module when the chassis is powered up. If you

replace a TSM with another TSM of the same type (same I/O ports), existing

configuration of port parameters is not affected. This includes parameters set

using any of the following attributes: ATMRoute, CACServiceClassBw,

IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,

SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with

another TSM of a different type, existing configuration of port parameters is

deleted. The deletion occurs when the new module is plugged into the chassis

backplane.

Operators

modify, show

Parameters

Input Parameter Description Value/Field Size Default

[PortNumber] Port number on the switch.

You can specify a physical or

virtual port.

A1 to B4 (physical-2500 family),

A1.n to B4.n (virtual-2500 family),

1A1 to 8B4 (physical-6500),

1A1.n to 8B4.n (virtual-6500),

or All

All

[TimerId] Timer name. +œÃÃˆL•iÊÜ>•ÖiÃÊ>Ài\Ê0Ïä£]0ÏäÏ]Ê

0ÏäÈ]0Ïän]Ê0Ïä™]Ê0Ï£ä]Ê0Ï£Ï]Ê0Ï£È]Ê

0Ï£Ç]Ê0ÏÔÔ]Ê0ÏÏ£]Ê0ÏÏÏ]Ê0Ï™Ç]0Ï™n]Ê

0Ï™™°

T303

[Interval] Timer value in milliseconds. Zero or positive integer 0

[Retries] Number of times the timer

has to be restarted.

Zero or positive integer 1