Specifications

2-276 SmartSwitch ATM Switch Reference Manual

SigStatistics

Use SigStatistics to display signaling statistics of a port.

Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.

Hot-swapping is replacing a module when the chassis is powered up. If you

replace a TSM with another TSM of the same type (same I/O ports), existing

configuration of port parameters is not affected. This includes parameters set

using any of the following attributes: ATMRoute, CACServiceClassBw,

IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,

SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with

another TSM of a different type, existing configuration of port parameters is

deleted. The deletion occurs when the new module is plugged into the chassis

backplane.

Operator

show

Parameters

Input Parameter Description Value/Field Size Default

[PortNumber] Port number on the switch.

You can specify a physical

or virtual port.

A1 to B4 (physical-2500 family),

A1.n to B4.n (virtual-2500 family),

1A1 to 8B4 (physical-6500),

1A1.n to 8B4.n (virtual-6500),

or All

All

Output Parameter Description

[Port#] Port number on the switch. (Same as the [PortNumber] input parameter.)

[Detect Setup Attempts] Number of set-up messages received.

[Emit Setup Attempts] Number of set-up messages transmitted.

[Detect Unavailable Routes] Number of SVC calls rejected by this switch because of unavailable IISP or UNI

routes generated on other switches.

[Emit Unavailable Routes] !Ö“LiÀÊœvÊ.7+ÊV>••ÃÊÀi•iVÍi`ÊLßÊÍ…ˆÃÊÃÝˆÍV…ÊLiV>ÖÃiÊœvÊÖ˜>Ü>ˆ•>L•iÊ77.+ÊœÀÊ2!7Ê

ÀœÖÍiÃÊ}i˜iÀ>Íi`Êœ˜ÊÍ…ˆÃÊÃÝˆÍV…°