Specifications

SmartSwitch ATM Switch Reference Manual 2-275
Shutdown
Shutdown
Use Shutdown to shut down the switch to a state where it can be powered off. Shutdown stops all logging and
synchronizes the file system. You must enter
shutdown before turning off the switch.
Operator
shutdown
Parameters
This attribute has no parameters. Just enter shutdown at the switch prompt.
Descriptions
Example
switch_prompt # shutdown
Confirm(y/n)?: y
switch_prompt #
You can switch off the system now
Operator Parameters/Permissions Descriptions
shutdown
Administrator After issuing this command, you are prompted for confirmation
(reply
y to confirm). After the switch is shutdown, you can
safely power off or reset the switch. Be sure not to confuse this
attribute with Exit. Use
exit simply to end a console session.