Specifications

2-272 SmartSwitch ATM Switch Reference Manual
ServiceRegistry
ServiceRegistry
Use ServiceRegistry to manage entries in the service registry MIB.
Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.
Hot-swapping is replacing a module when the chassis is powered up. If you
replace a TSM with another TSM of the same type (same I/O ports), existing
configuration of port parameters is not affected. This includes parameters set
using any of the following attributes: ATMRoute, CACServiceClassBw,
IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,
SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with
another TSM of a different type, existing configuration of port parameters is
deleted. The deletion occurs when the new module is plugged into the chassis
backplane.
Operators
add, delete, show
Parameters
Note The following applies to SmartSwitch 6500 only: If you hot-swap a TSM with a
TSM of a different type (different I/O ports), service registry information
associated with ports on the original TSM is deleted. Before you insert a
replacement TSM, you can display existing service registry information using the
show operator with the /o option (for example: show serviceregistry /o).
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. A1 to B4 (2500 family),
1A1 to 8B4 (6500),
(virtual-6500)
All
[ServiceType] Type of service (ANS or LECS) ANS, LECS LECS
[AddressIndex] Index identifying two services registered
for the same port and having the same
service type.
Positive integer No default
[AtmAddress] ATM address of the server. No default