Specifications

2-266 SmartSwitch ATM Switch Reference Manual
Route
Route
Use Route to administer IP route management to an ATM client through an Ethernet network. It allows network
management software to communicate across a network of switches.
Operators
add, delete, show
Parameters
Input Parameter Description Value/Field Size Default
[DestNetIP] IP address of a remote network. Dot decimal/
7-15 characters
No default
[GatewayIP] IP address for a gateway to the remote network. Dot decimal/
7-15 characters
No default
Output Parameter Description
[Destination] IP address of a remote network. (Same as the [DestNetIP] input parameter.)
[Gateway] IP address for a gateway to the remote network. (Same as the [GatewayIP] input
parameter.)
[Flags] The flags field is a bitmask of different options:
•
0x1 – Route is usable (“up”)
•
0x2 – Destination address is a gateway0x4 – Host-specific routing entry
•
0x10 – Created dynamically by ICMP redirect
•
0x20 – Modified dynamically by ICMP redirect
[Refcnt] Internal/debugging information.
[Use] Number of times this route has been used to send a packet.
[Interface] Interface used for forwarding packets on this route.