Specifications

2-260 SmartSwitch ATM Switch Reference Manual

RedundancyInfo

(SmartSwitch 6500 Only)

Use RedundancyInfo to set or display the location of the backup configuration file for the slave TSM/CPU module.

Typically, you would use the same backup file for the slave and master modules. If you do, you can use the

backup

switch

command to copy the current switch configuration to the slave backup file. If the name or location of the files

is different, however, you must use

execute redundancyconfigbackup to copy the current switch configuration to the

slave backup file.

Note

If automatic TSM/CPU redundancy is activated and operational, the slave

module is synchronized with current switch configuration automatically

(there is no need to administer a slave backup file).

Operators

modify, show

Parameters

Input Parameter Description Value/Field Size Default

[UpdateConfig] Sets/unsets a flag to update

configuration.

Y (Yes), N (No) N

[HostIP] IP address of server on which backup

configuration file resides.

Dot decimal/

7-15 characters

Last IP address used

[PathFileName] Full pathname of backup file. 256 characters Last pathname used

Output Parameter Description

[UpdateConfig] Sets/unsets a flag to update configuration.

[HostIP] IP address of server on which backup configuration file resides.

[PathFileName] Full pathname of backup file.