Specifications

2-252 SmartSwitch ATM Switch Reference Manual
PVP
In the Output Parameter table below, (
</d>
) indicates parameters that are available only through the show pvp /d
(detailed) command.
Output Parameter Description
[Conn Id] Cross-connect ID of the PVP (as assigned by switch software).
Each PTP PVP has a unique cross-connect ID. PMP PVPs might
have the same cross-connect ID but different cross-connect sub
IDs.
[Conn SubId] Cross-connect sub-ID of the PVP. Each PTP PVP and PMP PVP
has a unique cross-connect sub-ID.
[Low Port] Number of the Low Port (based on lexical order).
[Low VPI] VPI of the Low Port.
[Low Type] Connection type from perspective of Low Port.
[High Port] Number of the High Port (based on lexical order).
[High VPI] VPI of the High Port.
[High Type] Connection type from perspective of High Port.
[Admin Status] Administrative status of the PVC. Possible values are: Up or
Down.
[Low - High Traffic Decs Index (TX)]
</d>
Index of the traffic descriptor in the direction of flow from Low
Port to High Port.
[High - Low Traffic Decs Index (RX)]
</d>
Index of of the traffic descriptor in the direction of flow from
High Port to Low Port.
[Low to High Operation Status]
</d>
Operational status of low-to-high connection. Possible values
are: Up or Down.
[High to Low Operation Status]
</d>
Operational status of high-to-low connection. Possible values
are: Up or Down.
[Port Status]
</d>
Operational status of port.
[Creation Time]
</d>
Time the PVP was created (relative to the switch boot time).
[Traffic Type (High-Low)]
</d>
Traffic type in the high-to-low direction.
[Early Packet Discard (High-Low)]
</d>
Early packet discard as calculated by CAC for the cross connect
in the high-to-low direction.