Specifications

SmartSwitch ATM Switch Reference Manual 2-221
PortConfig
PortConfig
Use PortConfig to manage configuration of switch ports.
Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.
Hot-swapping is replacing a module when the chassis is powered up. If you
replace a TSM with another TSM of the same type (same I/O ports), existing
configuration of port parameters is not affected. This includes parameters set
using any of the following attributes: ATMRoute, CACServiceClassBw,
IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,
SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with
another TSM of a different type, existing configuration of port parameters is
deleted. The deletion occurs when the new module is plugged into the chassis
backplane.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. You can specify
a physical or virtual port.
1A1 to 8B4 ( for physical ports),
1A1.n to 8B4.n (for virtual ports,
or All
All
[PortAdminStatus] Enables/disables administrative status of
the port. If the port is Down, it remains idle
with no activity ( such as signalling, ILMI,
or PVCs).
Up, Down Up
[IlmiAdminStatus] Enables/disables ILMI status of the port. Up, Down Up
[SigType] Type of signalling on the port. autoConfig
means ILMI determines signalling type by
negotiation (hence ILMI cannot be
disabled for SigType autoConfig). pvcUni
and pvcNni disable signalling.
autoConfig, uni30, uni31, uni40
iisp30, iisp31, pnni10, uniPvc,
nniPvc
autoConfig
[SigRole] Signalling role. Other, Network, User Other
[InterfaceType] Interface type. Public, Private Private
[MaxVpiBits] Maximum number of VPI bits. 0-6 No default