Specifications

2-216 SmartSwitch ATM Switch Reference Manual
Port
Use Port to add or delete a virtual port on the switch.
Note The following applies to SmartSwitch 6500 only: You can hot-swap TSMs.
Hot-swapping is replacing a module when the chassis is powered up. If you
replace a TSM with another TSM of the same type (same I/O ports), existing
configuration of port parameters is not affected. This includes parameters set
using any of the following attributes: ATMRoute, CACServiceClassBw,
IlmiConfig, NetPrefix, Port, PortConfig, PVC, PVP, ServiceRegistry, SigTimer,
SigStatistics, SSCOPConfig, and SSCOPStatistics. If you replace a TSM with
another TSM of a different type, existing configuration of port parameters is
deleted. The deletion occurs when the new module is plugged into the chassis
backplane.
Operators
add, delete
Parameters
This attribute has no output parameters.
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. A1.n to B4.n (2500 family)
1A1.n to 8B4.n (6500)
No default
[PortAdminStatus] Enables/disables administrative status
of the port. If the port is Down, it
remains idle with no activity ( such as
signalling, ILMI, or PVCs).
Up, Down Up
[IlmiAdminStatus] Enables/disables ILMI status of the
port.
Up, Down Up
[SigType] Type of signalling on the port.
autoConfig means ILMI determines
signalling type by negotiation (hence
ILMI cannot be disabled for SigType
autoConfig). pvcUni and pvcNni
disable signalling.
autoConfig, uni30, uni31, uni40
iisp30, iisp31, pnni10, uniPvc,
nniPvc
autoConfig
[SigRole] Signalling role. Other, Network, User Other
[InterfaceType] Interface type. Public, Private Private