Specifications

SmartSwitch ATM Switch Reference Manual 2-207

PnniSummaryAddress

Use PnniSummaryAddress to manage summary address prefixes for the switch. A summary address is an abbreviation

of a set of addresses, represented by an address prefix that all of the summarized addresses have in common. The

switch advertises this information. Calls to any destinations matching the summary address may be routed to the

switch.

Operators

add, delete, show

Parameters

Input Parameter Description Value/Field Size Default

[Num] Index number of the summary address as assigned

by the console. Use the

show pnnisummaryaddress

all

command to get a list of index numbers.

Positive integer or All All

[Node Index] Identifier of a logical node on the switch. Positive integer 1

[SummaryAddress] ATM end system address prefix for the summary. No default

[PrefixLength] The prefix length (in bits) for the summary. No default

[SummaryType] Address type. Internal, Exterior Internal

[Suppress] Whether or not the switch advertises the summaries

to its peer group. Possible values are: True and

False. False specifies the summary is advertised.

True specifies the summary is not advertised (is

suppressed).

False, True False

Output Parameter Description

[Num] Index number of the summary address as assigned by the console.

[Summary Address] ATM end system address prefix for the summary.

[Summary Type] Address type.

[Suppress] Whether or not the switch advertises the summaries to its peer group.

If you give a specific [Num], the

show pnnisummaryaddress command displays the following additional fields.