Specifications

2-172 SmartSwitch ATM Switch Reference Manual
PnniMetrics
[CellLossRateForCLP=0+1] Cell loss ratio for CLP=0+1 traffic for the
specified service category. The cell loss ratio is
computed as 10
(-n)
where n is the value here.
[CellRateMargin] Cell rate margin (in cells per second) for the
specified service category.
[VarianceFactor] Variance factor in units of 2
(-8)
for the specified
service category.
Output Parameter Description
[Metrics Tag] Number associated with a group of traffic parameters.
[Direction] Direction in which the parameters apply. (Same as [TrafficDirection] input
parameter).
[Metrics Index] An index into the set of parameters associated with the given tag and direction.
[GCAC CLP] Indicates whether advertised GCAC parameters apply for CLP=0 traffic or for
CLP=0+1 traffic.
[Admin Wt] Administrative weight for the specified service categories from the switch to the
remote end of the PNNI link.
[Service Categories] Service category to which the parameters apply.
If you give a specific [MetricsTag], the
show pnnimetrics command displays the following additional fields.
[Maximum Cell Rate] Maximum cell rate (in cells per second) for the specified service category.
[Available Cell Rate] Available cell rate (in cells per second) for the specified service category.
[Maximum Cell Transfer Delay] Maximum cell transfer delay (in microseconds) for the specified service category.
[Cell Delay Variation] Cell delay variation (in microseconds) for the specified service category.
[Cell Loss Rate CLP0] Cell loss ratio for CLP=0 traffic for the specified service category. The cell loss
ratio is computed as 10
(-n)
, where n is the value of this parameter.
[Cell Loss Rate CLP0+1] Cell loss ratio for CLP=0+1 traffic for the specified service category. The cell loss
ratio is computed as 10
(-n)
, where n is the value of this parameter.
Input Parameter Description Value/Field
Size
Default