Specifications
SmartSwitch ATM Switch Reference Manual 2-169
PnniLink
Description
[Pnni Version] For lowest-level horizontal and unknown link types, this attribute indicates the version
of PNNI routing protocol used to exchange information. If communication with the
neighbor node has not yet been established, then the PnniVersion is set to Unknown.
[Port ID] Identifier of the port associated with the link with respect to PNNI routing.
[Remote Node Id] Identifier of the remote node.
[Remote Port Id] Identifier of the port associated with the link by the remote node.
[Derived Aggr. Token] Derived aggregation token of the link.
[Upnode Id] Identifier of the node at the other end of an uplink.
[Upnode ATM Addr] ATM address of the upnode.
[Common Peer Group Id] Peer group ID shared by the local node (on switch) and upnode.
[SVCC RCC Index] Index of switched virtual channel connection of routing control channel on link.
[Rcv Hellos] Number of Hello packets received over the link.
[Xmits Hellos] Number of Hello packets transmitted over the link.
Operator Parameters / Permissions Description
show pnnilink [Num] <num>
Administrator
Displays attributes of all PNNI links from the switch. You
might have configured multiple logical nodes on the
switch, each associated with a different set of links.
Output Parameter Description