Specifications

SmartSwitch ATM Switch Reference Manual 2-165
PnniInterface
PnniInterface
Use PnniInterface to set or display characteristics to configure a switch port for PNNI routing.
Operators
modify, show
Parameters
Input Parameter Description Value/Field Size Default
[PortNumber] Port number on the switch. You can
specify a physical or virtual port.
A1 to B4 (physical-2500 family),
A1.n to B4.n (virtual-2500 family),
1A1 to 8B4 (physical-6500),
1A1.n to 8B4.n (virtual-6500),
or All
All
[AdmnWtCbr] Administrative weight for the constant
bit rate (CBR) service category.
Positive integer 5040
[AdminWtRtVbr] Administrative weight for the realtime
variable bit rate (RTVBR) service
category.
Positive integer 5040
[AdminWtNrtVbr] Administrative weight for the
non-realtime variable bit rate (NRTVBR)
service category.
Positive integer 5040
[AdminWtAbr] Administrative weight for the available
bit rate (ABR) service category.
Positive integer 5040
[AdminWtUbr] Administrative weight for the
unspecified bit rate (UBR) service
category.
Positive integer 5040
[AggregationToken] Derived aggregation token for links
associated with the port. The aggregation
token used to determine which links to a
given neighbor node are to be aggregated
and advertised as a single logical link.
Positive integer 0
[RccServCategory] Service category used for the PNNI
routing control channel (VCI=18) on this
interface.
CBR, RTVBR, NRTVBR, ABR,
UBR
NRTVBR