Specifications

2-158 SmartSwitch ATM Switch Reference Manual
MyNMAddr
MyNMAddr
Use MyNMAddr to manage the switch through the specified IP address.
Operators
modify, show
Parameters
Descriptions
Examples
switch_prompt # modify mynmaddr
IpAddr() : 204.95.75.186
My Nm IP-Address : 204.95.75.186
switch_prompt #
switch_prompt # show mynmaddr
My Nm IP-Address : 204.95.75.186
switch_prompt #
Parameter Description Value/Field Size Default
[IPAddr] IP address of the switch. Dot decimal/
15 characters
Registered IP address
Operator Parameters/Permissions Description
modify
mynmaddr
[IPAddress] <ipaddress>
Administrator
Sets the IP address through which the switch can be managed
by the SNMP manager. The switch comes with a default
MyNMAddr that matches its Ethernet address. However,
MyNMAddr can be changed to an IP address that corresponds
to a LANE or IP/ATM (IP over ATM) client on the switch.
This allows the switch to be managed through an ATM
interface.
show
mynmaddr
[IPAddress] <ipaddress>
Administrator
Displays the current IP address through which the switch can
be managed.