Specifications

SmartSwitch ATM Switch Reference Manual 2-151
LNNIInfo
LNNIInfo
Use LNNIInfo to set or display LNNI parameters on the switch. LNNIInfo is one of two attributes that apply to general
LNNI configuration (the other is LNNIStatus).
Operators
modify, show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[LECSID] LECS identifier for the local LECS (LECS on
the switch). Up to eight LECS’ can act as
LECS neighbors in the network. Each LECS
must be assigned a unique LECSID.
-1 or 0-7 (use -1 if
no LECS will be
brought up on this
switch)
-1
Output Parameter Description
[LECS ID] LECS identifier for the local LECS (LECS on the switch). Up to eight LECS’
can act as LECS neighbors in the network. Each LECS must be assigned a
unique LECSID.
Operator Parameters/Permissions Description
modify lnniinfo
[LECSID] <lecsid>
Administrator
Sets LNNI parameters on the switch.
show lnniinfo
Administrator Displays LNNI parameters on the switch.