Specifications

SmartSwitch ATM Switch Reference Manual 2-133
LESELAN
LESELAN
Use LESELAN to manage characteristics of an LES for a specified ELAN. If a BUS corresponding to the LES exists,
the characteristics of the LES should match those of the BUS.
Operators
add, delete, modify, show
Parameters
Input Parameter Description Value/Field Size Default
[ELANNumber] Number of the ELAN served by the LES. 0-125 0
[ELANName] Name of the ELAN to which the LES
belongs.
Up to 32 characters
[ConnectMethod] Type of connection used. PVC, SVC SVC
[ELANType] The data-link type used by the ELAN. 802.3 (Ethernet)
802.5 (Token Ring)
802.3
[Multipoint] Indicates whether control distribute VCC is
PMP (point-to-multipoint) or PTP
(point-to-point).
Yes: VCC is PMP
No: VCC is PTP
Yes
[MTU] Maximum transfer unit for the clients joining
this ELAN.
1516, 1580, 4544, or
9234
1516
[ErrorLogEnable] Whether or not the BUS and LES error logs
are enabled.
Yes, No No
[MinimumTDEnable] Whether or not minimum acceptable traffic
descriptor negotiation is enabled.
Yes, No No
[LocalSegmentId] Local segment ID. (You are prompted for this
parameter only if 802.5 is specified for
ELANType.)
[ForwardPeakCellRate] Minimum forward peak cell rate. Positive integer
[BackwardPeakCellRate] Minimum backward peak cell rate. Positive integer