Specifications

SmartSwitch ATM Switch Reference Manual 2-123
LECSTLVSet
[FlushTimeout] Time limit on flush response after flush
request has been sent, before taking
recovery action.
1-4 seconds No default
[PathSwitchingDelay] Time since sending a frame to the LECS
after which the LANE client may assume
that the frame has been either discarded or
delivered to the recipient.
1-8 seconds No default
[LocalSegId] Segment ID of the ELAN. 0-4095 seconds No default
[MulticastSendVCCType] Signaling parameter used by the LEC when
establishing multicast send VCC.
0-2 No default
[MulticastSendVCCAvgRate] Signaling parameter used by the LEC when
establishing multicast send VCC.
0-370370 cells/s No default
[MulticastSendVCCPeakRate] Signaling parameter used by the LEC when
establishing multicast send VCC.
0-370370 cells/s No default
[ConnectionCompeteTime] Time period in which data or a message is
expected from a calling party when
establishing a connection.
1-10 seconds No default
[MPSKeepAliveTime] MPS Keep Alive Time.
[MPSKeepAliveLifeTime] MPS Keep Alive Life Time.
[MPSInternetProtocols] MPS Internetwork Layer Protocols.
[MPSInitialRetryTime] MPS Initial Retry Time.
[MPSRetryTimeMaximum] MPS Retry Time Maximum.
[MPSGiveupTime] MPS Give-up Time.
[MPSDefaultHoldingTime] MPS Default Holding Time.
[MPCSetupFrameCount] MPC Set-up Frame Count.
[MPCSetupFrameTime] MPC Set-up Frame Time.
[MPCFlowProtocols] MPC Flow Detection Protocols.
[MPCRetryTime] MPC Initial Retry Time.
Input Parameter Description Value/Field Size Default