Specifications

2-122 SmartSwitch ATM Switch Reference Manual
LECSTLVSet
LECSTLVSet
Use LECSTLVSet to manage TLV parameters on the LECS. A TLV set is a collection of TLV parameters associated
with an ELAN.
Operators
add, delete, modify, show
Parameters
Input Parameter Description Value/Field Size Default
[TLVSetNumber] Number that identifies the set of TLV
parameters on the LECS.
1-32767 1
[ControlTimeout] Time-out period used for timing out most
request/response control-frame
interactions.
10-300 seconds No default
[MaxUnknownFrameCount] Total counter frames a LANE client will
send to the LECS for a given unicast LAN
destination.
1-10 No default
[MaxUnknownFrameTime] Total time frames a LANE client will send
the LECS for a given unicast LAN
destination.
1-160 seconds No default
[VCCTimeout] Time-out period for releasing a data direct
VCC on an LEC if it has not been used to
transmit or receive any data.
0-65535 seconds No default
[MaxRetryCount] Maximum number of times a LEC should
try for a given LAN destination.
0-2 No default
[ArpAgingTime] Maximum time that a LEC maintains an
entry in its cache in the absence of updates.
10-300 seconds No default
[ForwardDelay] Maximum time a LEC will maintain an
entry for a non-local MAC address in its
cache in the absence of updates.
4-30 seconds No default
[ArpResponseTime] Maximum time that the LEC expects a
request/response cycle to take.
1-30 seconds No default