Specifications

2-114 SmartSwitch ATM Switch Reference Manual
LECSServerList
LECSServerList
Use LECSServerList to display the list of LES/BUS servers known to the LECS on the switch (local LECS). The
information is sorted by ELAN number (according to ELANs supported by the LES/BUS servers). The LES/BUS
servers can be known to the local LECS in either of two ways: The LES is attached directly to the local LECS and is
sending configuration requests to it; or, the LES is attached directly to a neighbor LECS that exchanges information
with the local LECS through LECS-LECS synchronization.
Note An LES is considered directly attached to an LECS if it has established a VCC to
that LECS (to get configuration information from that LECS). The LES is not
necessarily on the same switch as the LECS to which it is directly attached. Each
LES is colocated with a BUS. Though the LES and BUS are separate entities, the
two together are considered an instance of LES/BUS servers. The BUS is not
attached to an LECS, but it exchanges information with the LECS indirectly
through the LES colocated with the BUS.
Operators
show
Parameters
Input Parameter Description Value/Field Size Default
[ELANNumber] ELAN for which information is
requested.
0-125 or All All
Output Parameter Description
[Address] ATM address of the server.
[Learned From] ATM address of the LECS from which the server information was obtained.
[Alive Time] Time (in seconds) for which the server is assumed alive by the LECS.
[Locally Attached] Indicates whether or not the server is attached directly to the LECS.
If the server is attached directly, the
show lecsserverlist
command displays the following additional fields:
[Server ID] Unique (within the ELAN) ID representing the LES.
[LECId Range] LEC identification range assigned to the LES.