Specifications

SmartSwitch ATM Switch Reference Manual 2-113
LECSNeighborInfo
LECSNeighborInfo
Use LECSNeighborInfo to display status information about LECS neighbors. The LECS neighbors are remote LECS
servers that are known to (communicate with) the LECS on the switch (local LECS). The information includes the
identity of each LECS neighbor, the VPI/VCI and state of the outgoing leaf connection to that neighbor
(point-to-multipoint connection from the local LECS), and the VPI/VCI of the incoming VCC from the LECS
neighbor to the local LECS.
Operators
show
Parameters
This attribute has no input parameters
Descriptions
Examples
switch_prompt # show lecsneighborinfo
LECS Sync PMP VCC VPI/VCI : 0/0
Outgoing Incoming
Neighbor ATM Address State VPI/VCI
===============================================================================
50:a0:39:00:00:00:00:00:00:00:14:4a:00:00:20:d4:14:4a:00:00 Connecting 0/34
50:a0:39:00:00:00:00:00:00:00:14:4a:01:00:20:d4:14:4a:01:00 Active 0/33
switch_prompt #
Output Parameter Description
[Neighbor ATM Address] ATM address of the LECS neighbor.
[Outgoing State] State of the leaf connection to this neighbor as part of the LECS Synchronization VCC
(point-to-multipoint connection from the local LECS to the LECS neighbor). Possible
values are: Inactive, Connecting, Active, or Retry Wait.
[Incoming VPI/VCI] VPI/VCI of the VCC to the local LECS from the neighbor.
Operator Parameters/Permissions Description
show
lecsneighborinfo
Administrator Shows status information on LECS neighbors.