Specifications

2-108 SmartSwitch ATM Switch Reference Manual
LECSErrorLog
Examples
switch_prompt # delete lecserrorlog
switch_prompt #
switch_prompt # show lecserrorlog
ATM Address ErrorCode SysUpTime
==============================================================================
39:00:00:00:00:00:00:00:00:00:14:17:80:00:20:d4:14:17:80 20 02:21:10
switch_prompt #
2 Invalid request parameters The parameters given are incompatible with the ELAN.
4 Duplicate LAN destination
registration
SOURCE-LAN-DESTINATION duplicates a
previously-registered LAN destination.
5 Duplicate ATM address SOURCE-LAN-DESTINATION duplicates a
previously-registered ATM address.
6 Insufficient resources to grant
request
Responder is unable to grant request for reasons such as
insufficient table space or ability to establish VCCs.
7 Access denied Request denied for security reasons.
8 Invalid REQUESTOR-ID LECID field is not zero.
9 Invalid LAN destination LAN destination is a multicast address; or, LAN destination
is a route descriptor on an Ethernet/802.3 ELAN.
10 Invalid ATM address Source or target ATM address is not in a recognizable format
or is not valid.
20 No configuration LE client is not recognized.
21 LE_CONFIGURE Error Parameters supplied give conflicting answers. May also be
used to refuse service without giving a specific reason.
22 Insufficient information LE client has not provided sufficient information to allow the
LECS to assign it to a specific ELAN.
24 TLV not found There are no TLVs present in the set of TLVs for this emulated
LAN that can be returned with the Config-Frag-Info TLV
passed in the LE_CONFIGURE_REQUEST message.
Table 2-5 LECSErrorLog Error Codes (Continued)
Code Name Meaning