Specifications

SmartSwitch ATM Switch Reference Manual 2-107

LECSErrorLog

Use LECSErrorLog to display the log maintained by the LECS to track configuration request failures. You can control

the log using LECSErrorLogControl.

Note The log can contain up to 128 entries. After 128 entries, no additional entries are

logged until all current entries are deleted.

Operators

delete, show

Parameters

This attribute has no input parameters.

Descriptions

ÊÊ

Output Parameter Description

[ATM Address] ATM address of the client associated with the error.

[ErrorCode] Decimal code that shows why the error occurred (see Table 2-5).

[SysUpTime] Time the error occurred with respect to switch up-time in hours, seconds, minutes.

Operator Parameters/Permissions Description

delete lecserrorlog

Administrator Deletes all entries in the LECS error log.

show lecserrorlog All Displays the LECS error log.

Table 2-5 LECSErrorLog Error Codes

Code Name Meaning

0 Success Successful Response

1 Version not supported VERSION field of request contains a value higher than that

supported.