Specifications

SmartSwitch ATM Switch Reference Manual 2-87
Console Commands IPATMPVC
Examples
switch_prompt # add pvc
ConnType(PTP) :
Port-1-Number() : 1a1
Port-1-VPCI : 0
Port-1-VCI() : 130
Port-2-Number() : cpu
Port-2-VPCI() : 0
Port-2-VCI() : 130
Port1-to-Port2TrafficDescriptorIndex() : 1
Port2-to-Port1TrafficDescriptorIndex() : 1
switch_prompt #
switch_prompt # show pvc
PortNumber(ALL) :
CrossConnectId(ALL) :
CrossConnectSubId(ALL) :
=======================================================================
Conn Conn | Low | High | Admin
Id SubId | Port VPCI VCI Type| Port VPCI VCI Type | Status
=======================================================================
2 1 1A1 0 130 PTP CPU 0 130 PTP UP
Total number of PVCs = 1
switch_prompt #
switch_prompt # add ipatmclient
ClientNumber(0) :
ServerType(NONE) :
ServerAddress() :
IPAddress() : 10.1.1.2
NetMask(255.0.0.0) :
MTU(9180) :
switch_prompt #
delete
ipatmpvc
[ClientNumber] <clientnumber>
[DestinationVPI]<destinationVPI>
[DestinationVCI]<destinationVCI>
Administrator
Removes the specified IP/ATM PVC.
show
ipatmpvc
[ClientNumber] <clientnumber>
Administrator
Displays the details of an IP/ATM PVC.
Operator Parameters/Permissions Description