Specifications

2-86 SmartSwitch ATM Switch Reference Manual
IPATMPVC Console Commands
IPATMPVC
Use IPATMPVC to manage IP/ATM PVCs.
Note The following applies to the SmartSwitch 2500 family only: The delete
ipatmpvc
command removes the specified IPATMPVC as well as the PVC
associated with it.
Operators
add, delete, show
Parameters
Descriptions
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the client. 0-125 or All All
[DestinationVPI] VPI on CPU port of the attached PVC. 0-maximum 0
[DestinationVCI] VCI on CPU port of the attached PVC. 0-maximum 33
Output Parameter Description
[IP Address] IP address of the client on the other end of the PVC.
[VPI/VCI] VPI/VCI values of the IPATMPVC.
Operator Parameters/Permissions Description
add
ipatmpvc
[ClientNumber] <clientnumber>
Administrator
Creates an IP/ATM PVC. To achieve this, you must
first enter
add pvc then add ipatmclient for a new
client (see “IPATMClient” for more details). You can
then enter
add ipatmpvc.