Specifications

2-84 SmartSwitch ATM Switch Reference Manual
IPATMClient Console Commands
Descriptions
Operator Parameters/Permissions Description
add
ipatmclient
[ClientNumber] <clientnumber>
[ServerType] <servertype>
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
Creates a new IP/ATM client on the switch. If the circuits in
this VLAN are SVCs, and if you want to use this client as the
ARP server, enter
local for the server type. If you do not
want to use this client as the ARP server, enter
external as
the server type, and use the address of any configured ARP
server as the server address. If adding an IP/ATM client in a
PVC-only environment, enter
none for the server type.
modify
ipatmclient
[ClientNumber] <clientnumber>
[ServerType] <servertype>
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
Modifies an existing local IP/ATM client on the switch.
show client
[ClientNumber] <clientnumber>
All
Displays all or specified clients on the switch. Enter
show
client
to establish the activity of all the different client types
on the switch.