Specifications

SmartSwitch ATM Switch Reference Manual 2-79
Console Commands IlmiConfig
Note The following applies to SmartSwitch 6500 only: If you hot-swap a TSM with a
TSM of a different type (different I/O ports), ILMI timer information associated
with ports on the original TSM is deleted. Before you insert a replacement TSM,
you can display existing timer information using the
show operator with the /o
option (for example: show ilmiconfig /o).
Descriptions
Output Parameter Description
[Port] Port number on the switch. (Same as the [PortNumber] input parameter.)
[ILMIAddress] Shows whether or not ILMI address registration is enabled.
[ILMI] Shows whether or not ILMI connectivity is enabled.
[Timer S] Shows value of Timer S.
[Timer T] Shows value of Timer T.
[Factor K] Shows value of Factor K.
Operator Parameters/Permissions Description
modify ilmiconfig
[PortNumber] <elannumber>
[IlmiAddressRegistration]
<ilmiaddressregistration>
[IlmiConnectivity]
<ilmiconnectivity>
[Timer-S] <timers>
[Timer-T] <timert>
[Factor-K] <factork>
Administrator
Sets ILMI timers and functions.
show ilmiconfig [PortNumber] <elannumber>
Administrator
Shows status of ILMI timers and functions.