Specifications

SmartSwitch ATM Switch Reference Manual 2-75
Console Commands Firmware
Firmware
Use Firmware to download switch software from a TFTP server.
Operators
update
Parameters
This attribute has no output parameters.
Descriptions
Input Parameter Description Value/Field Size Default
[ServerIP] IP address of server with the software. Dot decimal/
7-15 characters
Last IP address
[Path] Full pathname of the directory that contains the
software.
Last path used
Operator Parameters/Permissions Description
update
firmware
[Server IP] <serverip>
[Path] <path>
Administrator
Updates the switch software (for example, when upgrading
your switch). You must know the full pathname of the updated
image files. In addition, the TFTP protocol must be installed
on the server. After doing an update, you must reboot the
switch for the new firmware to take effect. Reboot does not
affect switch configuration.