Specifications

CHAPTER 1: INTRODUCTION
1-2 WPIM-SY LOCAL MANAGEMENT GUIDE
The following list briefly explains each chapter of the WPIM-SY manual:
Chapter 1,
Introduction , outlines the contents of this manual, describes
WPIM-SY features, lists specifications, and concludes with a list of
related manuals.
Chapter 2,
Local Management , describes how to use Local Management
to setup the WPIM-SY.
Appendix A,
WAN Interface Cable Pinouts , provides Cabletron part
numbers, and detailed connector and pinout information for the interface
cables used with the WPIM-SY.
Appendix B,
WAN Terms and Acronyms , is a brief glossary of the terms
used in this book.
1.2 WPIM-SY FEATURES
The WPIM-SY provides a synchronous serial connection to external
communications equipment (e.g., a multiplexer or CSU/DSU). The
WPIM-SY uses a subminiature 26-pin connector that supports the
following electrical signal interfaces:
• EIA-RS232D 1.2 Kbps - 19.2 Kbps
• EIA-RS449 1.2 Kbps - 2.048 Mbps
• EIA-RS530 1.2 Kbps - 2.048 Mbps
• X.21 1.2 Kbps - 2.048 Mbps
• V.35 1.2 Kbps - 2.048 Mbps
• EIA-530A 1.2 Kbps - 2.048 Mbps