Specifications

Serial Cable Assemblies and Pinouts
WPIM-SY LOCAL MANAGEMENT GUIDE A-3
A.1.2 V.35
Table A-4 provides connector descriptions and Table A-5 provides pinouts for the
V.35 interface cable.
Table A-4. V.35 Interface
Cabletron interface cable part number 9380121
Description EIA-530A ALT A to V.35
Connector 1 Sub DB 26 pin male connector
Connector 2 M Series 34 pin male connector
Table A-5. Cable Pinout for V.35
CONNECTOR 1
EIA-530A ALT A
P
A
I
R
CONNECTOR 2
CCITT V.35
MNEMONIC Dir to NAME Pin # Pin # NAME Dir to MNEMONIC
BA DCE Transmit Data A 2 A P Transmit Data A DCE 103
BA DCE Transmit Data B 14 S Transmit Data B DCE 103
BB DTE Receive Data A 3 B R Receive Data A DTE 104
BB DTE Receive Data B 16 T Receive Data B DTE 104
CB DTE Clear to Send A 5 C D Ready for Sending A DTE 106
CA DCE Request to Send A 4 D C Request to Send A DCE 105
DB DTE Transmit Signal Timing A 15 E Y Transmitter Signal Timing A DTE 114
DB DTE Transmit Signal Timing B 12 AA Transmitter Signal Timing B DTE 114
DD DTE Receive Signal Timing A 17 F V Receiver Signal Timing A DTE 115
DD DTE Receive Signal Timing B 9 X Receiver Signal Timing B DTE 115
DA DCE Transmit Signal Timing A 24 G U Transmitter Signal Timing A DCE 113
DA DCE Transmit Signal Timing B 11 W Transmitter Signal Timing B DCE 113
CE DTE Ring Indicator 22 J Calling Indicator DTE 125
RL DCE Remote Loopback 21 N Loopback/Maintenance DCE 140
LL DCE Local Loopback 18 L Local Loopback DCE 141
TM DTE Test Mode 25 NN Test Indicator DTE 142
CC DTE DCE Ready 6 E Data Set Ready DTE 107
CD DCE DTE Ready 20 H Data Terminal Ready DCE 108
SHIELD 1 DRAIN
AC Signal Common 23 B Signal Common 102
AB Signal Common 7 B Signal Common 102