Specifications

WPIM-SY LOCAL MANAGEMENT GUIDE 2-1
CHAPTER 2
LOCAL MANAGEMENT
This Chapter explains how to configure the WPIM-SY through Local
Management. The
WAN Physical Configuration screen and the WAN
Interface Configuration screen
appear as Local Management menu
selections after you install the WPIM-SY into a WAN module such as the
BRIM-W6 and then install the BRIM into a MIM or standalone hub.
Refer to the MIM or standalone hub User’s Guide for instructions about
how to setup and access Local Management.
Sections of this chapter include:
• The WAN Physical Configuration screen 2.1
• The WAN Interface Configuration screen 2.2
• PPP Configuration 2.3
• LEX Configuration 2.4
• Frame Relay Configuration 2.5
Read Sections 2.1 and 2.2 to gain an understanding of the WPIM-SY
Local Management screens. Sections 2.3 through 2.5 provide examples
for setting up the WPIM-SY in a PPP (LEX or BNCP) or Frame Relay
environment.
Navigate through the WPIM Local Management Screens by
using the following keyboard commands:
SPACEBAR to toggle between selections in a field.
ENTER (RETURN) to implement a selection.
Arrow keys to move up, down or sideways within the screen.
TIP