Specifications

WPIM-E1 SPECIFICATIONS
WPIM-E1 LOCAL MANAGEMENT GUIDE
1-3
WAN Protocols
As of this printing, the module in which the WPIM-E1 is installed
supports the following WAN protocols (refer to the Release Notes
included with the host MIM or standalone hub for a list of current
protocols):
Point to Point Protocol (LCP ) as defined by RFC 1661
Point to Point Protocol (BNCP) as defined by RFC 1638
Point to Point Protocol LAN Extender (PPP/LEX)
Frame Relay as defined by RFC 1490
MIB Support
Refer to the Release Notes included with the host MIM or standalone hub
for a list of all MIBs supported by the WPIM-E1. For information about
how to extract and compile individual MIBs, contact Cabletron Systems
Technical Support (see
Getting Help
).
1.4 WPIM-E1 SPECIFICATIONS
This section describes the environmental specifications and
safety/approval requirements for the WPIM-E1. Cabletron Systems
reserves the right to change these specifications at any time without
notice.
Environmental Requirements
Operating Temperature: +5
°
to +40
°
C (41
°
to 104
°
F)
Non-operating Temperature: -30
°
to +90
°
C (-22
°
to 194
°
F)
Operating Humidity: 5% to 95% (non-condensing)
Safety
This unit meets the safety requirements of EN60950.
EMI
This unit meets the EMI requirements of EN55022 Class A and
VCCI Class I.