Specifications

CHAPTER 2: LOCAL MANAGEMENT
2-14 WPIM-E1 LOCAL MANAGEMENT GUIDE
2.4 FRACTIONAL E-1 CONFIGURATION USING PPP
This section provides step-by-step instructions for configuring the
WPIM-E1 to use a fractional E-1 circuit in a PPP environment. This
example assumes the setup shown in figure 2-6 using two MicroMMAC
hubs each with a BRIM-W6 containing a WPIM-E1. Configurations may
vary depending on the hub. In a fractional E-1 setup, only a portion of the
32 Timeslots or DS-0’s are used.
Figure 2-6. Fractional E-1 Configuration
The terms DS-0 (Digital Signal, level 0) and Timeslot are
used synonymously in this guide to represent a standard
64,000 bit/second channel.
NOTE
SITE #1
with BRIM-W6
SITE #2
with BRIM-W6
Telco Cloud
16 Timeslots
16 Timeslots
1484_06