Specifications

WPIM-T1 FEATURES
WPIM-T1 LOCAL MANAGEMENT GUIDE 1-3
1.3 WPIM-T1 FEATURES
The WPIM-T1 extends the functionality of your Wide Area Network
module to allow remote connectivity using WAN services such as T-1, or
Fractional T-1.
The WPIM-T1 provides a T-1 interface that includes a built-in Channel
Service Unit/Digital Service Unit (CSU/DSU) for direct connection to a
T-1 line. This WPIM supports both Full T-1 or Fractional T-1 using 56 or
64 Kbps timeslots.
WAN Protocols
As of this printing, the module in which the WPIM-T1 is installed
supports the following WAN protocols (refer to the Release Notes
included with the host MIM or standalone hub for a list of current
protocols):
• Point to Point Protocol (LCP) and as defined by RFC 1661
• Point to Point Protocol (BNCP) and as defined by RFC 1638
• Point to Point Protocol LAN Extender (PPP/LEX)
• Frame Relay as defined by RFC 1490
MIB Support
Refer to the Release Notes included with the host MIM or standalone hub
for a list of all MIBs supported by the WPIM-T1. For information about
how to extract and compile individual MIBs, contact Cabletron Systems
Technical Support (see
Getting Help ).
1.4 RELATED MANUALS
Refer to the manual included with the host Wide Area Network module
(e.g., the
BRIM-W6 User’s Guide ) to supplement the procedures and
other technical data provided in this manual. Refer to the MIM,
standalone hub or module User’s Guides and/or Local Management
Guides for Local Management setup information. This manual references
procedures in these manuals, where appropriate, but does not repeat them.