Specifications

WPIM-T1 LOCAL MANAGEMENT GUIDE B-1
APPENDIX B
FCC PART 68 - USER’S INFORMATION
The following instructions are to ensure compliance with the Federal
Communications Commission (FCC) Rules, Part 68.
1. All direct connections to T1 lines must be made using standard plugs
and jacks.
2. Before connecting your unit, you must inform the local telephone
company of the following information:
3. If the unit appears to be malfunctioning, it should be disconnected
from the telephone lines until you learn if your equipment or the
telephone line is the source of the trouble. If your equipment needs
repair, it should not be reconnected until it is repaired.
4. The CSU/DSU has been designed to prevent harm to the T1 network.
If the telephone company finds that the equipment is exceeding
tolerable parameters, the telephone company can temporarily
disconnect service, although they will attempt to give advance notice
if possible.
5. Under the FCC Rules, no customer is authorized to repair this
equipment. This restriction applies regardless of whether the
equipment is in or out of warranty.
Port ID REN/SOC FIC USOC
WPIM-T1 6.0N 04DU9-BN
04DU9-DN
04DU9-1KN
04DU9-1SN
04DU9-1ZN
RJ48C