Specifications

CHAPTER 2: LOCAL MANAGEMENT
2-10 WPIM-T1 LOCAL MANAGEMENT GUIDE
2.3 FULL T-1 CONFIGURATION USING PPP
This section provides step-by-step instructions for configuring the
WPIM-T1 to use a full T-1 circuit in a PPP environment. This simplified
example assumes the setup shown in Figure 2-5 using a MicroMMAC
hub with a BRIM-W6 containing a WPIM-T1 at Site #1. Configurations
may vary depending on the hub.
Figure 2-5. Full T-1 Configuration
The line configuration information shown in Table 2-1 must be supplied
by the service provider.
Table 2-1. Telco Configuration Information
Configuration Information
Required by User
Configuration Information
Supplied by Service Provider
Line Coding B8ZS or AMI
Frame Type ESF or D4
Clock Source Loop Timing or Local Timing
SITE #1
Telco Cloud
24 Timeslots
24 Timeslots
SITE #2
1482_05