Specifications

CHAPTER 2: LOCAL MANAGEMENT
2-8 WPIM-T1 LOCAL MANAGEMENT GUIDE
Data Compression
Displays the status of Data Compression. This field displays YES or NO.
The default setting is NO.
Max Xmit Unit
User-configured field that displays the maximum packet size that can be
transmitted on the selected interface. The default settings for this field are
8191 for PPP and 4095 for Frame Relay.
Line Coding
Displays the Line Coding for timeslots associated with this interface. This
field displays JBZS, INV-HDLC, or None. The default setting for this
field is None.
Active Protocol
Displays the active OSI Layer protocol. This field toggles between None,
FR (Frame Relay), or PPP (Point-to-Point). The default setting is None.
If you select PPP, the following field appears:
PPP Type: This field toggles between BNCP or LEX.
If you select FR, the following field appears:
FR LMP: This field displays NO LMI, Q.933-A or
T1.617-D. Set this field to T1.617-D. The NO
LMI setting is for specialized applications in
which no Frame Relay Link Management is
available or required.
If NO LMI is selected, the following fields are displayed:
DLCI Address: This field can be set to values from 0-1023. The
values 0-15 and 1008-1022 are reserved DLCI
addresses.
Circuit State: Toggles between Active, Inactive and Invalid.