Technical data

NBR-620 Events and Alarms
Event and Alarm Messages NBR-620, NBR-420 and NBR-220
4-6 Management Module Guide
CsEvFormat/Event000d0111
{d Ò%w- %d %m-, %Y - %TÓ} -
Collision threshold exceeded. Collisions
exceeded {I 1}% of good packets in {I 3}
seconds on the module in slot {I 5} of {m}
({t}).
CsPCause/Prob000d0111
Collisions are caused by many nodes
contending for the network of cabling
faults. Use port level thresholds to further
troubleshoot to a device level.
CsEvFormat/Event000d0112
{d Ò%w- %d %m-, %Y - %TÓ} -
TrafÞc threshold, packets per {I 3}
seconds, exceeded on port {I 7} on module
in slot {I 5} of {m} ({t}).
CsPCause/Prob000d0112
The device(s) attached to this port may
have an application which requires a
large amount of network bandwidth. If
the application requires a large amount of
network bandwidth, then a bridge or
router could be used to logically separate
various network segments.
CsEvFormat/Event000d0113
{d Ò%w- %d %m-, %Y - %TÓ} -
Error threshold exceeded. An error
threshold of {I 1}% good packets in {I 5}
seconds, exceeded on port {I 9} on module
in slot {I 7} of {m} ({t}).
CsPCause/Prob000d0113
The device(s) attached to this port could
have a hardware failure where it
transmits invalid packets or the cable
segment attached to this port may have a
problem. Check cable for loose connection
or continuity problems.
CsEvFormat/Event000d0114
{d Ò%w- %d %m-, %Y - %TÓ} -
Collision threshold exceeded. Collisions
exceeded {I 1}% of good packets in {I 3}
seconds on port {I 7} on module in slot {I 5}
of {m} ({t}).
CsPCause/Prob000d0114
The device(s) attached to this port may
have an adapter card problem which
causes them to transmit without
regarding network availability or a cable
problem may exist. Check adapter card
and cable for loose connections,
termination problems, or improper
pinouts.
Table 4-1. NBR-620 Events and Alarms (Continued)
Event Message Probable Cause Message