Technical data

NBR-620 Events and Alarms
Event and Alarm Messages NBR-620, NBR-420 and NBR-220
4-4 Management Module Guide
CsEvFormat/Event000d0103
{d Ò%w- %d %m-, %Y - %TÓ} - Network
conÞguration change reported by {m} ({t}).
Device linked to port {I 3} on module in
slot {I 1}.
CsPCause/Prob000d0103
A device supporting link integrity, Þber
optic, or twisted pair has made a valid
connection (link) to this port.
CsEvFormat/Event000d0104
{d Ò%w- %d %m-, %Y - %TÓ} - Network
conÞguration change reported by {m} ({t}).
Device previously linked to port {I 3} on
module in slot {I 1} has ceased to transmit
link integrity pulse.
CsPCause/Prob000d0104
A device previously linked to this port has
been removed, powered down, or the cable
segment has a fault.
CsEvFormat/Event000d0105
{d Ò%w- %d %m-, %Y - %TÓ} - New source
address {X 5}, is detected on {m} ({t}), port
{I 3} of module in slot {I 1}.
CsPCause/Prob000d0105
A device, previously linked or not, has
transmitted a packet that was received on
this port. The device is either new or has
been powered up but has not transmitted
a packet during the aging time period.
CsEvFormat/Event000d0106
{d Ò%w- %d %m-, %Y - %TÓ} - Source
address {X 5}, has timed out on port {I 3}
of the module in slot {I 1} of {m} ({t}).
CsPCause/Prob000d0106
A device linked or not linked to this port
has not transmitted a packet during the
aging time period, and has been removed
from the source address table of the
device.
CsEvFormat/Event000d0107
{d Ò%w- %d %m-, %Y - %TÓ} - Device
conÞguration change reported by {m} ({t}).
The module in slot {I 1} has been removed.
CsPCause/Prob000d0107
A module within this hub has been
removed or has failed.
CsEvFormat/Event000d0108
{d Ò%w- %d %m-, %Y - %TÓ} - Device
conÞguration change reported by {m} ({t}),
A module has been inserted into {I 1} of
the MMAC.
CsPCause/Prob000d0108
A module has been inserted into this hub.
Table 4-1. NBR-620 Events and Alarms (Continued)
Event Message Probable Cause Message