Technical data

9031240 E5 ConÞguration Views
3-5
FDDI Port ConÞguration View
FDDI Port ConÞguration View
The FDDI Port ConÞguration View provides information concerning the
conÞguration of the FDDI port. To access the FDDI Port ConÞguration View,
click on the Logical FDDI Port Icon from the Chassis Device View to highlight
it, and select Port ConÞguration View from the Icon Subviews menu.
Port ConÞguration View Banner
The Port ConÞguration View banner displays the following information.
Model Name
The FDDI SMT chassis model name.
Network Address
The IP address of the FDDI SMT.
SMT.Port
The left number represents the FDS SMT number, and the number to the
right of the decimal point represents the port index.
Port Management
The Port Management section of the FDDI Port ConÞguration View provides
the following information:
Port Action
This Þeld allows you to enable/disable the port. The state returns to ÒOtherÓ
once the port has been enabled/disabled.
Port State
The status of this port. Possible states are: disabled, connecting, standby, and
active.
nsip Xerox Network Service Protocol over IP
slip Generic Serial Line IP
ultra ULTRA Technologies
sip Switched Multimegabit Data Service
frame-relay T1 Frame relay
Table 3-1. NBR-620 Interface Types (Continued)